Home
SOLAR MODULE
Kyocera
Eging
Solarfun
Yingli Solar
Black Line
Tracking system
Complete Set
WINDENERGY
CHARGE CONTROLLER
Steca
Morningstar
FOX
IVT
CONVERTER
Steca
INVERTER
Steca
Mastervolt
SMA
MONTAGE
DIVERSE
Cable
Plug
SATELLITE
Receiver
Rotatable
Positioner

 

IVT MPPT 10 Ampere Solar Charge Controller

IVT MPPT 10 Ampere Solar Charge Controller
 
Art.No.:PD-01234
Weight:0,72 kg
Manufacturer:IVT
Delivery time: Directly delivering

 
Including VAT (19%)

 Piece Add to cart

Solar technology

MPPT (Max Power Point Tracking)
Automatic system voltage recognition 12/24V
Solar-Input voltage range from 5V to 25V (3A) or 5V to 60V (10,20,30A)
Two independent battery charging options (Version 3A only)
Accu deep discharge protection, overcharge protection, overvoltage protection, desulfatizing
Temperature dependent charge parameter correction
Excess temperature protection, excess current protection, polarity protection
Separate load output with switch-off option


The MPPT (Max Power Point Tracking) enables you to make optimum usage of the solar power of your solar modules. The most efficient working point of the solar modules is modified by various factors, such as module temperature, irradiation, module type etc. This working point is permanently monitored by the internal microcontroller and, if required, is controlled in such a way that the optimum performance of the solar module is available and your batteries are charged with the highest available current. The solar charger is very well suited for all applications with the same mass potential (-), as the load is switched off in the plus circuit (+). Photovoltaic solar systems are usually run with lead-acid, maintenance-free lead-acid, lead-gel and AGM batteries for storing the energy. Lead batteries must be protected against deep discharging and overcharging. The MPPT solar charge controller fulfils both requirements, the batteries are also perfectly maintained by an intelligent service mode. The switching thresholds for overvoltage/under voltage, load switch-off and reset voltage are controlled and by the internal microcontroller precisely at a stable temperature.
A switchable load output enables you to switch on and off all consumers connected to the MPPT solar charge controller by the push of a button.

 

TECHNICAL SPECIFICATIONS
 
Systeem voltage 12/24 volt dc
Solar panel voltage 5 volt to 60 volt dc
Solar panel load 10 ampere
Internal current consumtion active 15 mA
Internal current consumtion standby <1 mA
Temperature range -25 to +60C
Protection type IP20
Dimensions in mm 190 x 112 x 59
Weight 720 Gramm